All these ports are based on Iservd 1.4.8.  The source can be found in 
the Src directory or can be picked up online at ftp://ftp.computone.com. 
To gain access to the online archive for the IntelliServer line of
products, you'll need to have purchased a Support contract on your unit.
Please note that our RCM products come pre-bundled with support.


File List:

Aix:
	Aix 4.2.1.0
FreeBSD:
	FreeBSD 4.4

HPUX:
	HP-UX 11.00
Sun:
	Solaris 8 x86 (Intel)
	Solaris 7/8 Sparc (Sun Equipment)
Linux:
	Redhat 7.1
OpenUnix8:
	Caldera OpenUnix8  (UnixWare)

SCO:
	SCO OpenServer 5.0.6


If you need assistance, please contact support at     
800-241-3946 ext. 2002 or via email at
support@computone.com

	
Installation:


Copy conf/iservd.conf to /etc on host machine and edit to insert correct
configuration.

Copy the correct iservd binary to /sbin on host machine and give it execute
privileges.  

If you've setup the unit correctly and iservd.conf is correct, everything
should be working.  The source is provided in the case that our precompiled
binary is not functional and you must make your own.

License:

This software is licensed for use only with Computone equipment.  You may 
make modifications as you wish.  

This software is provided AS  IS with no warranty implied to its behavior and 
functionality.  If you need any assistance you are welcome to call Computone
support provided that you meet the following conditions:

1.  You are within 90-days of the purchase of the unit which iservd will be
    connecting to.

2.  You have purchased a support contract.

3.  Your unit comes pre-bundled with a support contract.


If you do not meet the above conditions, please feel free to contact Computone
sales at 800-241-3946 and they can assist in selecting one of our support
options.  You will also be entitled to free software upgrades of the 
IntelliServer product when you have a support contract.